Submissions
Author Guidelines
- For submitting to this journal, authors need to register with the journal prior to submitting or, if already registered, can simply login and begin the process.
- For the registration please send a request email to editor.jdaf@gmail.com.
Guide for Authors
Contents
1. About the journal
1.1 Aims and scope
The Journal of Design Against Fatigue (JDAF), which is a fully open access journal, publishes original research, critical reviews and applied studies on the prediction, prevention and management of fatigue damage in engineering materials, components and structures. The emphasis is on knowledge that can be used in design: how material, manufacturing route, surface condition, loading and environment control fatigue performance, and how that understanding is translated into reliable life prediction, test methods and design rules. Topics include, but are not limited to:
• fatigue and fracture mechanisms in metals, polymers, ceramics, composites and hybrid or multi-material systems;
• effects of manufacturing processes (machining, grinding, joining, forming, additive manufacturing, surface treatments) and of surface integrity on fatigue life;
• Microstructural and micromechanical modelling
• high-cycle, low-cycle, very-high-cycle, thermomechanical, multiaxial and variable-amplitude fatigue;
• crack initiation and growth, notch and size effects, and defect-tolerant design;
• experimental methods, in situ and full-field measurement, fractography and non-destructive evaluation;
• computational, probabilistic and data-driven approaches to fatigue life prediction and structural integrity;
• fatigue-critical applications in aerospace, energy, transport, biomedical and civil engineering, and the contribution of fatigue design to durability and sustainability.
Manuscripts that report routine test data, or analyses without a clear advance in understanding or in design practice, are unlikely to be sent for review. Authors should make the relevance of their work to design against fatigue explicit in the Introduction and in the cover letter.
1.2 Article types
The journal publishes the article types: Research article, Review article, Short communication, Technical note / Design case study.
1.3 Open access, copyright and licensing
JDAF is a fully open access journal. Every article is published under the Creative Commons Attribution 4.0 International licence (CC BY 4.0), which allows anyone to share and adapt the work for any purpose provided the original article is properly cited. Authors keep the copyright in their work. The copyright line ‘© [Year] by the author(s)’ and the licence statement are added to the last page of each article by the editorial office.
Publication charges: There is an Article Processing Charge (APC) of 500 GBP. However, JDAF offers APC waivers and discounts based on the corresponding author’s country income level, institutional agreements, or financial hardship. The author may request a waiver or discount during the online submission process. The waiver requests are hidden from peer reviewers and do not affect editorial decisions. Charges are invoiced only after acceptance, and an author’s ability to pay plays no part in editorial decisions.
1.4 Peer review
JDAF uses single-anonymised peer review: reviewers know who the authors are, but authors are not told who reviewed their manuscript. Each submission is first checked by an editor for scope, originality and standard of presentation. Manuscripts that pass this check are sent to at least two independent expert reviewers. The handling editor makes a decision on the basis of the reports, and the Editor-in-Chief has final responsibility for all decisions. Authors may appeal a decision once, by writing to the editorial office with a reasoned case.
Manuscripts submitted to special issues go through the same process. Guest editors may select reviewers and recommend decisions, but final decisions rest with the journal’s editors, and guest editors may not handle manuscripts of which they are an author or in which they have a conflict of interest.
2. Ethics and publishing policies
2.1 Publishing ethics
JDAF follows the Core Practices of the Committee on Publication Ethics (COPE). Suspected misconduct, including plagiarism, duplicate or redundant publication, fabrication or falsification of data, image manipulation, citation manipulation and undisclosed conflicts of interest, will be investigated following COPE guidance and may lead to rejection, correction or retraction. Submissions may be checked with similarity-detection software.
2.2 Originality, prior publication and preprints
Submission implies that the work has not been published before (other than as an abstract, conference presentation, thesis or preprint), that it is not under consideration elsewhere, and that all authors and, where required, the authorities of the institutions where the work was done have approved its submission.
Posting a preprint on a recognised server (for example arXiv, SSRN or engrXiv) before or during submission is permitted and is not counted as prior publication. Mention the preprint in the cover letter and, after publication, update the preprint record with a link to the published article (DOI).
A manuscript that extends a published conference paper must add substantial new data, analysis or interpretation. Cite the conference paper, and explain in the cover letter what is new.
2.3 Authorship
Each author should have made a substantial contribution to (i) the conception or design of the work, or the acquisition, analysis or interpretation of data; (ii) drafting the manuscript or revising it critically for important intellectual content; and (iii) approving the final version, and should agree to be accountable for the work. People who contributed but do not meet these criteria should be thanked in the Acknowledgements. Generative AI tools cannot be authors.
The corresponding author handles communication with the journal during submission, peer review and publication, and answers queries after publication. No more than two corresponding authors may be named.
Changes to the author list (additions, removals or a change of order) must be requested by the corresponding author before acceptance, with the reason and the written agreement of all authors, including anyone being added or removed. Changes are not normally made after acceptance.
2.4 Author contributions (CRediT)
Every article with more than one author must include an Author contributions statement using the Contributor Roles Taxonomy. Give each author’s full name in bold, followed by their roles.
|
Example. Author A: Conceptualization, Methodology, Supervision, Writing – original draft. Author B: Investigation, Formal analysis, Visualization, Writing – review & editing. Author C: Resources, Funding acquisition. |
2.5 Competing interests
All authors must disclose any financial or personal relationship that could be seen to influence the work, such as employment, consultancy, shareholdings, honoraria, patents, or funding from an organisation with an interest in the outcome. Report these in a Competing interests section. If there are none, use the template wording: ‘The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper’.
2.6 Funding
List all sources of funding in a Funding section, giving each funder’s full name and the grant number, for example ‘This work was supported by [funder name] [grant number]’. Describe any role the funder had in the study design, data collection, analysis or interpretation, writing, or the decision to submit; if it had none, say so. If the work received no specific funding, state: ‘This research received no specific grant from any funding agency in the public, commercial or not-for-profit sectors.’
2.7 Use of generative AI
• Authors may use generative AI tools to improve the language and readability of a manuscript. These tools must not replace the author’s own work in producing scientific insight, analysing or interpreting data, or drawing conclusions.
• Authors are fully responsible for the content of their manuscript, including checking that statements and references are correct; AI tools can produce plausible but non-existent citations.
• Generative AI must not be used to create or alter experimental images (micrographs, fractographs, digital image correlation fields, photographs of specimens or test set-ups). It may be used for schematic artwork or a graphical abstract only if this is stated in the figure caption.
• Where AI tools were used to prepare the manuscript, add a Declaration of generative AI use section before the References: ‘During the preparation of this work, the author(s) used [tool name and version] to [purpose]. The author(s) reviewed and edited all resulting content and take full responsibility for the published article.’ No declaration is needed for basic spelling and grammar checkers or reference managers.
• Machine learning or other AI methods used as part of the research (for example, data-driven fatigue life prediction) are part of the methodology and must be described in the Methods section, not in this declaration.
• Reviewers and editors must not upload manuscripts, or any part of them, to generative AI tools.
2.8 Image integrity
Specific features of an image must not be enhanced, obscured, moved, removed or added. Adjustments to brightness, contrast or colour balance are acceptable if they are applied to the whole image and do not hide or remove information; non-linear adjustments (for example gamma correction) must be stated in the caption. Composite or stitched images must be identified as such, with joins marked. Keep the original, unprocessed image files; the editors may ask to see them.
2.9 Research data
Every research article must include a Data availability statement, which is published with the article. Authors are strongly encouraged to deposit the data that support their findings, and any code used to generate them, in a public repository that issues a persistent identifier (for example Zenodo, Figshare or an institutional repository) and to cite the dataset in the reference list. Typical statements are:
• ‘The data that support the findings of this study are openly available in [repository] at https://doi.org/[DOI].’
• ‘The data are available from the corresponding author on reasonable request.’
• ‘The data cannot be shared because of [commercial confidentiality / export control / other reason].’
2.10 Language
Manuscripts must be written in clear English, using either British or American spelling consistently. Use inclusive language and avoid terms that imply bias or stereotypes. Authors whose first language is not English may wish to have their manuscript edited before submission; the editorial office corrects language at copy-editing but does not rewrite poorly written manuscripts.
3. Preparing your manuscript with the JDAF template
3.1 Using the template
Manuscripts must be prepared in the JDAF Word template and submitted as an editable Word (.docx) file. The template is used both for review and for production, so the reviewed manuscript closely resembles the published article; final copy-editing and typesetting are done by the editorial office. When preparing your manuscript:
• do not change the page set-up, the section breaks, the column layout or the style definitions;
• apply the template styles (Section 3.3) rather than formatting text directly;
• do not delete or edit the journal banner, the running header or the Article history panel, which are completed by the editorial office;
• accept or reject all tracked changes and delete all comments before submission;
3.2 Page layout
The template uses an A4 page with a single-column front matter on the first page followed by a two-column body.
3.3 Styles and typography
Use the styles defined in the template; ‘panel’ refers to the borderless table that holds the article history, keywords and abstract on the first page.
3.4 Front matter
Title
Keep the title concise and informative, and use sentence case (capitalise only the first word, proper nouns and established acronyms). Avoid formulae and undefined abbreviations; if an abbreviation is needed, give it in full followed by the abbreviation in parentheses.
Authors and affiliations
Give each author’s full given name(s) and family name, in the order entered in the submission system. Mark affiliations with superscript Arabic numerals after the names and the corresponding author with an asterisk, for example ‘Hassan Ghadbeigi1,*, Luke Jones1, … Jack Rooke2’. Each affiliation should give the department, institution, street address, city, postcode and country of the institution where the work was done. If an author has since moved, give the present address in a footnote. Authors are encouraged to register their ORCID iDs in the submission system.
Corresponding author
Give one (at most two) corresponding author with an institutional e-mail address, which will be published: ‘* Corresponding author: Name; e-mail’.
Keywords
Give up to seven keywords (four to six are recommended), each starting with a capital letter and separated by semicolons. Avoid terms already in the title, general terms such as ‘fatigue’ on their own, and abbreviations that are not well established.
Abstract
The abstract (≤ 250 words, one paragraph) must stand on its own. State the problem and its relevance to fatigue design, the approach, the main quantitative findings and the significance of the results. Do not cite references, figures or tables, and define any abbreviation at first use in the abstract and again in the main text.
Highlights
Research articles and reviews must be accompanied by three to five highlights, each no longer than 85 characters including spaces, submitted as a separate file named ‘Highlights’. Highlights are short statements of the main findings, not a summary of the methods.
Graphical abstract (optional)
A graphical abstract is a single image that summarises the article for readers browsing online. Submit it as a separate file (TIFF, PNG, PDF or Word) of at least 531 × 1328 pixels (height × width), legible when displayed at 5 × 13 cm. Do not reuse a figure from the article without adapting it to this format.
3.5 Article structure
Number sections as 1, 1.1, 1.1.1 and refer to them by number (‘see Section 3.2’). The abstract and the back-matter headings are not numbered. A research article usually contains:
• 1. Introduction – the fatigue design problem, the relevant literature, the gap and the objectives;
• 2. Materials and methods – enough detail for the work to be repeated (Section 6 lists what to report); methods already published should be cited, with changes described;
• 3. Results and 4. Discussion – these may be combined; the discussion should interpret the results, compare them with the literature and state their implications for design and their limitations;
• 5. Conclusions – a short statement of the main conclusions, which may be given as a numbered list; do not repeat the abstract.
Appendices, if any, follow the Conclusions and are labelled Appendix A, Appendix B, …; their equations, tables and figures are numbered Eq. (A.1), Table A.1 and Fig. A.1. The back matter then follows in this order, using the Heading 1 style without numbers:
1. Supplementary material (list of supplementary files, if any)
2. Acknowledgements
3. Funding
4. Competing interests
5. Author contributions
6. Data availability
7. Declaration of generative AI use (if applicable)
8. References
3.6 Units, symbols and nomenclature
• Use SI units and the conventions of the SI Brochure and ISO 80000. Put a space between a number and its unit (10 MPa, 5 kHz, 25 °C); following the template, no space is used before % or the plane-angle symbol (60%, 10°).
• Use the multiplication sign for dimensions (25 × 15 × 3 mm), an en dash for ranges (200–400 m/min), and a true minus sign (−75 °C), not a hyphen.
• Set symbols for quantities in italic (σ, N, R, a) and units, numbers, mathematical constants and descriptive subscripts upright (σmax, Nf, Kt). Use the same symbol for a quantity in the text, equations, tables and figures.
• Define each abbreviation at first use. If there are many symbols, a Nomenclature table may be placed at the start of the main text, before Section 1.
3.7 Equations
• Type all equations with the Word equation editor (or MathType); do not insert them as images.
• Give simple expressions in the text, using a solidus for small fractions (σa/σu).
• Centre displayed equations in the column and number them consecutively in parentheses at the right margin. Refer to them as Eq. (1) or Eqs. (2)–(4); at the start of a sentence write ‘Equation (1)’.
• Define every symbol immediately after the equation in which it first appears, and break long equations so that they fit the 83.8 mm column; if this is not possible, place the equation across the full text width at the top or bottom of a page.
3.8 Footnotes
Use footnotes sparingly and number them consecutively in the text. Do not use footnotes in the abstract or in tables; use table notes instead (Section 5).
4. Figures and artwork
4.1 General requirements
• Number figures consecutively in the order in which they are first cited, and cite every figure in the text. Abbreviate ‘Figure’ to ‘Fig.’ in the running text, including at the start of a sentence, as in the template: ‘Fig. 2 shows …’, ‘(Fig. 1a)’, ‘Figs. 3 and 4’, ‘Figs. 7c–f’.
• Place each figure in the template close to, and after, its first citation, either within one column or across both columns at the top or bottom of a page. Insert it ‘in line with text’ (not floating) inside the template’s figure container, a borderless table with an image row and a caption row, so that the figure and its caption stay together.
• Label the panels of a multi-part figure (a), (b), … in the top left corner of each panel, in the same font and size throughout, and describe each panel in the caption.
• Prepare each figure at its final printed size (single column 84 mm or full text width 174 mm) rather than enlarging or reducing it in Word.
4.2 Lettering, lines and colour
• Use one font for all figures, preferably Arial (or Helvetica) or Times New Roman, with text 7–9 pt at final size and no smaller than 6 pt for subscripts and superscripts.
• Label axes with the quantity, its symbol and its unit in a consistent form, for example ‘Stress amplitude, σa (MPa)’; use the same symbols as the text.
• Make lines at least 0.25 pt (about 0.1 mm) thick at final size, and distinguish data series by marker shape or line style as well as by colour, so that figures remain readable in greyscale.
• Give every micrograph and fractograph a scale bar (magnifications in captions are not acceptable), and state the imaging mode and conditions (for example SEM, secondary electrons, 15 kV).
• On fractographs, mark the crack initiation site(s) and the direction of crack growth.
4.3 Captions
Place the caption below the figure in Times New Roman 9 pt, starting with the bold label ‘Figure 1.’. A caption must be understandable without the text: describe each panel in order, and explain all symbols, abbreviations, colours, arrows and error bars (for example ‘error bars show ± one standard deviation of five measurements’) and, where relevant, the test conditions. Do not put a title inside the figure itself.
4.4 Artwork checklist
• Each figure is cited in the text and numbered in order of first citation.
• Figures are sized to 84 mm or 174 mm and meet the minimum resolution at that size.
• Image compression is switched off in Word, and separate source files are supplied.
• Fonts, font sizes, line widths and symbols are consistent across all figures.
• Axes carry quantities, symbols and units; micrographs carry scale bars.
• Colours are accessible and the figure is readable in greyscale.
• Every symbol, colour and arrow are explained in the caption.
• Permission has been obtained for any reproduced material, and the source is acknowledged.
5. Tables
• Prepare tables with Word’s table tool as editable text, never as images. Number them consecutively in order of first citation and cite them in full in the text (‘Table 1’, not abbreviated).
• Place the caption above the table: ‘Table 1.’ in bold followed by a concise title, in Times New Roman 9 pt. Set the table body in Times New Roman 8 pt.
• Use three horizontal rules only: above the column headings, below them and at the bottom of the table. Do not use vertical rules or cell shading.
• Give units in the column headings, in parentheses; align numbers on the decimal point and quote a consistent number of significant figures.
• Place notes below the table, linked by superscript lower-case letters (a, b, c), and define abbreviations used in the table.
• Fit tables within one column (83.8 mm) or the full text width (174 mm).
6. References
6.1 Citation in the text
• Cite references by number in square brackets, in the order in which they are first cited: [1]; [9, 10]; [6–8] (en dash for ranges). Place the citation before punctuation.
• Authors may be named in the text with the number: ‘Xiao and Zhang [10]’ for two authors, ‘Brown et al. [3]’ for three or more.
• Every citation must appear in the reference list and every entry in the list must be cited. Unpublished results and personal communications may be mentioned in the text but should not be listed.
• Cite the original sources of methods and data rather than reviews alone, and avoid excessive self-citation.
6.2 Reference list
Set the reference list in Times New Roman 8 pt with a 4.5 mm hanging indent and the number in square brackets. The JDAF style is based on IEEE style:
• authors’ initials before the family name, separated by commas, without ‘and’; list all authors, or, for works with more than ten authors, the first six followed by ‘et al.’;
• article and chapter titles in double quotation marks and sentence case, followed by a comma inside the quotation marks;
• journal and book titles in full (not abbreviated) and in italics;
• volume, issue and pages as ‘vol. 47, no. 3, pp. 381–393’, or ‘Art. no. 59’ for article numbers, followed by the year;
• a DOI, written as a URL (https://doi.org/…), for every item that has one;
• a full stop at the end of each reference.
Examples (the first three are taken from the template):
Journal article
[3] E. N. Brown, R. B. Willms, G. T. Gray, P. J. Rae, C. M. Cady, K. S. Vecchio, J. Flowers, M. Y. Martinez, “Influence of molecular conformation on the constitutive response of polyethylene: a comparison of HDPE, UHMWPE, and PEX,” Experimental Mechanics, vol. 47, no. 3, pp. 381–393, 2007, https://doi.org/10.1007/s11340-007-9045-9.
Journal article with an article number
[24] S. Wojciechowski, “Estimation of minimum uncut chip thickness during precision and micro-machining processes of various materials—a critical review,” Materials, vol. 15, no. 1, Art. no. 59, 2022, https://doi.org/10.3390/ma15010059.
Conference paper
[15] R. Bertolini, A. Ghiotti, S. Bruschi, “Cryogenic machining to enhance surface finish of a biomedical grade ultra-high-molecular weight polyethylene,” in Proceedings of ESAFORM 2021: 24th International Conference on Material Forming, Liège, Belgium, 2021, https://doi.org/10.25518/esaform21.3749.
Book
[n] R. B. Heywood, Designing Against Fatigue. London, UK: Chapman and Hall, 1962.
Book chapter
[n] A. B. Author, “Title of chapter,” in Title of Book, C. D. Editor, Ed., 2nd ed. City, Country: Publisher, Year, pp. xx–yy, https://doi.org/…
Standard
[n] Metallic materials — Fatigue testing — Statistical planning and analysis of data, ISO 12107:2012, International Organization for Standardization, Geneva, Switzerland, 2012.
Thesis
[n] A. B. Author, “Title of thesis,” PhD thesis, Department, University, City, Country, Year.
Report
[n] A. B. Author, “Title of report,” Organisation, City, Country, Rep. no. xxx, Year, https://doi.org/…
Dataset
[n] A. B. Author, C. D. Author, “Title of dataset,” [Dataset], Repository name, Year, https://doi.org/…
Software
[n] A. B. Author, “Name of software,” version x.y, [Software], Year, https://doi.org/…
Preprint
[n] A. B. Author, “Title of preprint,” [Preprint], Server name, Year, https://doi.org/… (cite the published version once available).
Web page
[n] Organisation or author, “Title of page.” URL (accessed DD Month YYYY).
6.3 Reference management software
Any reference manager may be used; an IEEE output style gives a close match to the JDAF style, but check the result against the rules above (in particular full journal titles and DOIs). Before final submission, convert reference-manager field codes to plain text.
7. Submission
7.1 How to submit
Submit manuscripts through the submission system. (https://journal.orbisacademics.com/index.php/JDAF/about/submissions) The corresponding author registers, enters the details of all authors (with ORCID iDs where available) and uploads the required files, Cover letter, Manuscript in the JDAF template including all declarations, Highlights and optional files.
7.2 Cover letter
The cover letter should give the title and article type; explain in two or three sentences what is new and why it matters for design against fatigue; confirm that the work is original and not under consideration elsewhere; mention any preprint or closely related publication; and suggest three to five potential reviewers, with institutional e-mail addresses, who have not collaborated with any of the authors in the past three years and are not at the authors’ institutions. Authors may also name people they would prefer not to review the manuscript, with reasons.
7.3 Revised manuscripts
Respond to each reviewer comment point by point, saying what was changed and where, or explaining why a change was not made. Upload a version of the manuscript with changes highlighted and a clean version, within the period stated in the decision letter.
8. After acceptance
• Proofs. The corresponding author receives a PDF proof by e-mail and should return all corrections within two working days. Only typographical and factual errors may be corrected at this stage; changes to scientific content need the editor’s approval.
• Publication. Articles are published online with a DOI as soon as the proof corrections have been made. The dates received, revised, accepted and available online are shown on the first page; volume, issue and page numbers are assigned when the issue is compiled.
• Sharing. Under the CC BY 4.0 licence, authors and readers may share the published article freely, including in institutional and subject repositories. Please link to the article’s DOI.
• Corrections. Errors found after publication are corrected by a published correction (erratum or corrigendum), following COPE guidance; the online article is not altered without notice.
When you're satisfied that your submission meets this standard, please follow the checklist below to prepare your submission.
Submission Preparation Checklist
All submissions must meet the following requirements.
- This submission meets the requirements outlined in the Author Guidelines.
- This submission has not been previously published, nor is it before another journal for consideration.
- All references have been checked for accuracy and completeness.
- All tables and figures have been numbered and labelled.
- Permission has been obtained to publish all photos, datasets and other material provided with this submission.
Articles
Section default policy
Copyright Notice
JDAF is an international open access journal, all articles are published under a Creative Commons (CC BY) license. It means unlimited use and reuse of articles, giving credit to the authors.
Privacy Statement
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.