Design and finite element analysis of S355J2 wing holders on tank wagons

Authors

  • Okan Unal Karabük University image/svg+xml Author https://orcid.org/0000-0001-6392-0398 (unauthenticated)
  • Adnan Gursoy RC Industry R&D Department, Sakarya, Turkey Author
  • Abdulkadir Duman RC Industry R&D Department, Sakarya, Turkey Author
  • Oguzhan Erdogan RC Industry R&D Department, Sakarya, Turkey Author
  • Cagatay Kaptan RC Industry R&D Department, Sakarya, Turkey Author
  • Mustafa Yasar Department of Metal Education, Karabuk University, Karabuk, Turkey Author
  • Kazem Reza Kashyzadeh Department of Transport, Academy of Engineering, Peoples’ Friendship University of Russia (RUDN University), 6 Miklukho-Maklaya Street, 117198 Moscow, Russia Author

DOI:

https://doi.org/10.62676/q512en21

Keywords:

Wing holder, thickness reduction, finite element analysis, tank wagon

Abstract

Wagon component failures that occur during service life can be reduced by applying appropriate geometric changes and using optimization techniques. Therefore, crucial changes are being studied to improve design and performance in structures such as connecting parts, braking systems, suspension, and transmission systems. The wing holders also have a load-bearing feature in connecting the body to the chassis. The strength of the wagon, component stabilization, and weight reduction are of great importance during transportation. In this study, finite element analysis was carried out for the novel type wing holders of the tank wagon system designed via simpler and stepless with various thicknesses. The von Mises stresses and total deformations, as finite element results, for the thicknesses of 10 mm, 12 mm, and 14 mm occurred due to the standard of EN 12663-2:2010 for both longitudinal and vertical loading conditions were extracted from the software. Finally, according to the design improvements, a new wing holder model was developed, which can contribute to the reduction of production and assembly costs.

References

1. O. Fomin, A. Lovska, P. Kučera, V. Píštěk, Substantiation of Improvements for the Bearing Structure of an Open Car to Provide a Higher Security during Rail/Sea Transportation, Journal of Marine Science and Engineering 9(8) (2021) 873, https://doi.org/10.3390/jmse9080873.

2. A. Lovska, O. Fomin, V. Píštěk, P. Kučera, Dynamic Load and Strength Determination of Carrying Structure of Wagons Transported by Ferries, Journal of Marine Science and Engineering 8(11) (2020) 902, https://doi.org/10.3390/jmse8110902.

3. L. Vukić, I. Kraemer, Dependence of Transport and External Cost Variables on Transportation Route Length, Journal of Marine Science and Engineering 9(11) (2021) 1270, https://doi.org/10.3390/jmse9111270.

4. A. Sulym, P. Khozia, E. Tretiak, V. Píštěk, O. Fomin, P. Kučera, Aspects of Strength Testing of Tank Containers in Compliance with the Requirements of the UN Navigation Rules and Regulations, Journal of Marine Science and Engineering 9(3) (2021) 349, https://doi.org/10.3390/jmse9030349.

5. S. Zhu, X. Xu, Y. Li, Dynamic response of railway vehicle with aerodynamic admittance function: An optimized algorithm, Journal of Wind Engineering and Industrial Aerodynamics 227 (2022) 105075, https://doi.org/10.1016/j.jweia.2022.105075.

6. Y. Guo, Q. Sun, Y. Sun, Dynamic evaluation of vehicle-slab track system under differential subgrade settlement in China's high-speed railway, Soil Dynamics and Earthquake Engineering 164 (2023) 107628, https://doi.org/10.1016/j.soildyn.2022.107628.

7. J.Y. Alcaraz, J. Zhang, A.P. Nagalingam, S.K. Gopasetty, B.L. Toh, A. Gopinath, K. Ahluwalia, M.G.W. Ang, S.H. Yeo, Numerical modeling of residual stresses during vibratory peening of a 3-stage Blisk – a multi-scale discrete element and finite element approach, Journal of Materials Processing Technology 299 (2022) 117383, https://doi.org/10.1016/j.jmatprotec.2021.117383.

8. Y. Bai, Z. He, C. Su, N. Bao, H. Wang, G. Shi, Y. Wang, J. Yun, Z. Wang, Research on dynamic characteristics of novel filled damping block mesh-type rail pads for heavy haul railways, Construction and Building Materials 354 (2022) 129174, https://doi.org/10.1016/j.conbuildmat.2022.129174.

9. C. Qu, Z. Wang, L. Wei, Y. Xiao, Z. Chang, Field investigation of dynamic responses of a culvert-embankment transition zone in high-speed railway, Soil Dynamics and Earthquake Engineering 158 (2022) 107314, https://doi.org/10.1016/j.soildyn.2022.107314.

10. G. Song, H. Ji, W. Pei, J. Li, J. Zhao, W. Xiao, B. Wang, Prediction of microstructure evolution during multidirectional forging of the railway wagon bogie adpter, Materials Today Communications 32 (2022) 104143, https://doi.org/10.1016/j.mtcomm.2022.104143.

11. O. Fomin, J. Gerlici, A. Lovska, M. Gorbunov, K. Kravchenko, T. Lack, Creating mathematical model of the bearing structure dynamic load of the flat wagon from round pipes in the main operational modes, Transportation Research Procedia 55 (2021) 875-881, https://doi.org/10.1016/j.trpro.2021.07.179.

12. J. Kim, J. Yoon, B. Kang, Finite element analysis and modeling of structure with bolted joints, Applied Mathematical Modelling 31(5) (2007) 895-911, https://doi.org/10.1016/j.apm.2006.03.020.

13. C. Chang, L. Ling, S. Chen, W. Zhai, K. Wang, G. Wang, Dynamic performance evaluation of an inspection wagon for urban railway tracks, Measurement 170 (2021) 108704, https://doi.org/10.1016/j.measurement.2020.108704.

14. E. Kuba, M. Moravčík, V. Pavelčík, Experimental verification of tank wagon’s ability to transmit longitudinal forces in opposite track curves, Transportation Research Procedia 55 (2021) 774-781, https://doi.org/10.1016/j.trpro.2021.07.045.

15. J. Gerlici, Y. Fomina, O. Fomin, K. Kravchenko, V. Hauser, Analysis of the possibility of the use of tough side bearers in the covered wagons design for the light-weight loads transportation, Transportation Research Procedia 40 (2019) 694-702, https://doi.org/10.1016/j.trpro.2019.07.098.

16. T. Jin, Z. Liu, S. Sun, Z. Ren, L. Deng, B. Yang, M.D. Christie, W. Li, Development and evaluation of a versatile semi-active suspension system for high-speed railway vehicles, Mechanical Systems and Signal Processing 135 (2020) 106338, https://doi.org/10.1016/j.ymssp.2019.106338.

17. R. Xiu, M. Spiryagin, Q. Wu, S. Yang, Y. Liu, Fatigue life assessment methods for railway vehicle bogie frames, Engineering Failure Analysis 116 (2020) 104725, https://doi.org/10.1016/j.engfailanal.2020.104725.

18. S.S. Harak, S.C. Sharma, S.P. Harsha, Structural Dynamic Analysis of Freight Railway Wagon Using Finite Element Method, Procedia Materials Science 6 (2014) 1891-1898, https://doi.org/10.1016/j.mspro.2014.07.221.

19. K. Kravchenko, P. Šťastniak, M. Moravčík, J. Dižo, M. Blatnický, An innovative design of a protective device for integrity of tank wagons in a collision, Transportation Research Procedia 55 (2021) 767-773, https://doi.org/10.1016/j.trpro.2021.07.044.

20. G. Vatulia, A. Falendysh, Y. Orel, M. Pavliuchenkov, Structural Improvements in a Tank Wagon with Modern Software Packages, Procedia Engineering 187 (2017) 301-307, https://doi.org/10.1016/j.proeng.2017.04.379.

21. O. Fomin, A. Lovska, V. Bohomia, I. Berestovoi, Determination of dynamic loading of a tank wagon with malleable links between the pot and the frame, Procedia Structural Integrity 36 (2022) 239-246, https://doi.org/10.1016/j.prostr.2022.01.030.

22. A. Tevlek, H.M. Aydin, E. Maleki, R. Varol, O. Unal, Effects of severe plastic deformation on pre-osteoblast cell behavior and proliferation on AISI 304 and Ti-6Al-4V metallic substrates, Surface and Coatings Technology 366 (2019) 204-213, https://doi.org/10.1016/j.surfcoat.2019.03.034.

23. A. Colaço, A. Castanheira-Pinto, P. Alves Costa, J. Fernández Ruiz, Combination of experimental measurements and numerical modelling for prediction of ground-borne vibrations induced by railway traffic, Construction and Building Materials 343 (2022) 127928, https://doi.org/10.1016/j.conbuildmat.2022.127928.

24. L. Zou, L. Lu, Y. Li, K. Yang, H. Zhao, Y. Dong, D. Zeng, Experimental and numerical study on press-fitted railway axles: Fretting fatigue behaviour in the very high cycle regime, International Journal of Fatigue 166 (2023) 107243, https://doi.org/10.1016/j.ijfatigue.2022.107243.

25. M. Živković, V. Milovanović, N. Jovanović, M. Bojović, Experimental and numerical investigation of sliding bolt connection on the wagon for the transport petroleum products, Materials Today: Proceedings 32 (2020) 88-92, https://doi.org/10.1016/j.matpr.2020.02.819.

26. Z. Song, S. Fang, Y. Zhang, J. Xie, Cracking analysis of bolster cover plate in C70 freight wagons, Engineering Failure Analysis 30 (2013) 43-60, https://doi.org/10.1016/j.engfailanal.2012.12.015.

27. E. Maleki, D. Burton, M.C. Thompson, On the flow past and forces on double-stacked wagons within a freight train under cross-wind, Journal of Wind Engineering and Industrial Aerodynamics 206 (2020) 104224, https://doi.org/10.1016/j.jweia.2020.104224.

Downloads

Published

2023-10-21

How to Cite

Unal, O., Gursoy, A., Duman, A., Erdogan, O., Kaptan, C., Yasar, M., & Kashyzadeh, K. R. (2023). Design and finite element analysis of S355J2 wing holders on tank wagons. Journal of Design Against Fatigue, 1(3). https://doi.org/10.62676/q512en21