Failure analysis of resistance spot welds in a DP1000 automotive steel: full field macro/ micro scale deformation analysis

Authors

DOI:

https://doi.org/10.62676/jdaf.2025.3.2.10

Keywords:

resistance spot weld, fracture, strain distribution

Abstract

The effect of welding parameters on local deformation and failure of resistance spot welds in a DP1000 high strength dual phase steel are investigated. A novel experimental framework is developed together with new sample geometries to investigate failure modes in the weld sections. Macro and microscopic experiments using optical and scanning electron imaging combined with digital image correlation are used to better understand the role of microstructural morphology and loading conditions on deformation and damage of the weld nugget in the studied materials. The results show a transition from the interfacial failure to pull-out failure as the welding current increases. The measured plastic strain at failure is larger for higher welding currents. The fracture surface at the nugget is dominated by brittle and shear fracture for interfacial failure mode in samples produced with lower welding current, however ductile and shear fracture are more pronounced on the samples with pull-out failure mode under higher welding current.

References

1. Dancette S, Fabrègue D, Massardier V, et al. Experimental and modeling investigation of the failure resistance of advanced high strength steels spot welds. Engineering Fracture Mechanics. 2011;78(10):2259-2272. https://doi.org/10.1016/j.engfracmech.2011.04.013

2. Bouzekri M, Dancette S, Dupuy T, et al. An investigation of failure types in high-strength steel resistance spot welds. Welding in the World. 2010;54(3-4):3-14. https://doi.org/10.1007/BF03263485

3. Dancette S, Massardier-Jourdan V, Merlin J, et al., editors. Investigations on the mechanical behavior of advanced high strength steels resistance spot welds in cross tension and tensile shear. Advanced Materials Research; 2010; 89-91: 130-135 https://doi.org/10.4028/www.scientific.net/AMR.89-91.130

4. Pouranvari M, Marashi SPH, Jaber HL. DP780 dual-phase-steel spot welds: critical fusion-zone size ensuring the pull-out failure mode. Mat Technol. 2015;49:579-585. https://doi.org/10.17222/mit.2014.184

5. Pouranvari M, Marashi S. Failure of resistance spot welds: tensile shear versus coach peel loading conditions. Ironmaking & Steelmaking. 2012;39(2):104-111. https://doi.org/10.1179/1743281211Y.0000000066

6. Pouranvari M, Marashi S. Similar and dissimilar RSW of low carbon and austenitic stainless steels: effect of weld microstructure and hardness profile on failure mode. Materials Science and Technology. 2009;25(12):1411-1416. https://doi.org/10.1179/026708309X12459430509292

7. Pouranvari M, Ranjbarnoodeh E. Dependence of the fracture mode on the welding variables in the resistance spot welding of ferrite-martensite DP980 advanced high-strength steel. Materials and Tehnology. 2012;46(6):665-671.

8. Dancette S, Fabregue D, Massardier V, et al. Investigation of the tensile shear fracture of advanced high strength steel spot welds. Engineering Failure Analysis. 2012;25:112-122. https://doi.org/10.1016/j.engfailanal.2012.04.009

9. Radakovic D, Tumuluru M. An evaluation of the cross-tension test of resistance spot welds in high-strength dual-phase steels. Welding journal. 2012;91(1):8-15.

10. Yao Z, Omiya M, Ma N, et al. Local mechanical characterization and fracture prediction modeling for resistance spot-welded joints of advanced high-strength steel. Materials Today Communications. 2023;36:106787. https://doi.org/10.1016/j.mtcomm.2023.106787

11. Huin T, Dancette S, Fabrègue D, et al. Investigation of the failure of advanced high strength steels heterogeneous spot welds. Metals. 2016;6(5):111. https://doi.org/10.3390/met6050111

12. Alharbi K, Ghadbeigi H, Efthymiadis P, et al. Damage in dual phase steel DP1000 investigated using digital image correlation and microstructure simulation. Modelling and Simulation in Materials Science and Engineering. 2015;23(8):085005. https://doi.org/10.1088/0965-0393/23/8/085005

13. Ghadbeigi H, Pinna C, Celotto S & Yates JR. Local plastic strain evolution in a high strength dual-phase steel. Materials Science and Engineering: A. 2010, 527 (18-19). pp. 5026-5032, https://doi.org/10.1016/j.msea.2010.04.052

14. Vautrin A, Lee JR, Molimard J, et al., editors. Full-field optical techniques: Applications to strain measurement and mechanical identification. 10th European Conference on Composite Materials (ECCM10); 2002.

15. McKelvie J. Moire strain analysis: an introduction, review and critique, including related techniques and future potential. Journal of Strain Analysis for Engineering Design. 1998, 33(2):137-151. https://doi.org/10.1243/0309324981512878

16. Díaz-Garrido EL-AaFA. Full-Field Indentation Damage Measurement Using Digital Image Correlation. Materials 2017, 10(7), 774; https://doi.org/10.3390/ma10070774

17. Tong Wu MC, Alain Combescure. Strain Localisation and Damage Measurement by Full 3D Digital Image Correlation: Application to 15-5PH Stainless Steel. Strain, 2011, 47 (1), pp.49-61.

https://doi.org/10.1111/j.1475-1305.2008.00600.x

18. Ghadbeigi H, Pinna C, Celotto S. Failure mechanisms in DP600 steel: initiation, evolution and fracture. Materials Science and Engineering: A. 2013;588:420-431, https://doi.org/10.1016/j.msea.2013.09.048

19. Siebert T, Becker T, Spiltthof K, et al., editors. Error estimations in digital image correlation technique. Applied Mechanics and Materials; 2007; 7-8: 265-270 https://doi.org/10.4028/www.scientific.net/AMM.7-8.265

20. Vassoler J, Fancello E. Error analysis of the digital image correlation method. Mecánica Computacional. 2010;29(61):6149-6161.

21. Pan B, Xie H, Wang Z, et al. Study on subset size selection in digital image correlation for speckle patterns. Optics express. 2008;16(10):7037-7048,

https://doi.org/10.1364/OE.16.007037

22. Midawi A, Shojaee M, Mohamadizadeh A, et al. A novel technique to measure the local mechanical properties of third generation advanced high strength steel resistance spot welds. Forces in Mechanics. 2022;9:100150,

https://doi.org/10.1016/j.finmec.2022.100150

23. Shojaee M, Betiku O, Tolton C, et al. Investigating the Mechanical Properties and Failure Behavior of Groups of Resistance Spot Welds under Tensile-Bending Loading Conditions. Journal of Materials Engineering and Performance. 2025:1-20,

https://doi.org/10.1007/s11665-025-10798-2

24. Shojaee M, Tolton C, Midawi A, et al. An experimental methodology to characterize load-based fracture models of third generation advanced high strength steel resistance spot welds. The International Journal of Advanced Manufacturing Technology. 2024;132(1):943-965, https://doi.org/10.1007/s00170-024-13438-6

25. Mohamadizadeh A, Biro E, Worswick M. Shear band formation at the fusion boundary and failure behaviour of resistance spot welds in ultra-high-strength hot-stamped steel. Science and Technology of Welding and Joining. 2020;25(7):556-563, https://doi.org/10.1080/13621718.2020.1773057

26. Mohamadizadeh A, Biro E, Worswick M. Failure characterization and meso-scale damage modeling of spot welds in hot-stamped automotive steels using a hardness-mapping approach. Engineering Fracture Mechanics. 2022;268:108506,

https://doi.org/10.1016/j.engfracmech.2022.108506

27. Mohamadizadeh A, Biro E, Worswick M. Novel double-half spot weld testing technique for damage progress and failure analysis using digital image correlation techniques. Experimental Mechanics. 2021;61(9):1405-1418, https://doi.org/10.1007/s11340-021-00743-4

28. Yu F. Investigation of failure mechanisms of resistance spot welds in automotive steels using various techniques: University of Sheffield; 2020.

29. Committee A. Standard Test Methods for Tension Tesing of Metallic Materials (E8/E8M − 13a). Retrieved from www.astm.org 2013.

30. Chen N, Wang H-P, Carlson BE, et al. Fracture mechanisms of Al/steel resistance spot welds in coach peel and cross tension testing. Journal of Materials Processing Technology. 2018;252:348-361, https://doi.org/10.1016/j.jmatprotec.2017.09.035

31. Daneshpour S, Kokabi A, Ekrami A, et al. Crack initiation and kinking behaviours of spot welded coach peel specimens under cyclic loading. Science and Technology of Welding and Joining. 2007;12(8):696-702, https://doi.org/10.1179/174329307X238416

32. BS EN ISO 14273:2001: Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds 2002.

33. Q. Yin CS, K. Isik, A.E. Tekkaya. A grooved in-plane torsion test for the investigation of shear fracture in sheet materials. International Journal of Solids and Structures. 2015; 66, 121-132. Article 8735. https://doi.org/10.1016/j.ijsolstr.2015.03.032.

34. C. Soyarslan MMG, A.E. Tekkay. A combined experimental–numerical investigation of ductile fracture in bending of a class of ferritic–martensitic steel. International Journal of Solids and Structures. 2012; 49(13), 1608-1626. https://doi.org/10.1016/j.ijsolstr.2012.03.009

35. Sylvain DANCETTE VM-J, Damien FABRÈGUE, Jacques MERLIN, Thomas DUPUY and Merlin BOUZEKRI. HAZ Microstructures and Local Mechanical Properties of High Strength Steels Resistance Spot Welds. ISIJ International,. 2011, 51(1):99-107, https://doi.org/10.2355/isijinternational.51.99

36. Lamouroux EHJ, Coutellier, Daniel, editor Detailed model of spot-welded joints to simulate the dynamical failure of car assemblies in Industrial Simulation; Dellft: 5th International Industrial Simulation Conference 2007, ISC 2007.

37. Nielsen KL, Tvergaard, Viggo. Ductile shear failure or plug failure of spot welds modelled by modified Gurson model. Engineering Fracture Mechanics. 2010.; 77(7):1031-1047, https://doi.org/10.1016/j.engfracmech.2010.02.031

38. Correlated Solutions Inc VIC 2D/3D Software. 2009.

39. E92−17 A. Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials. 2017.

40. Abdalla A, Hashimoto T, Neto CM, et al. Relationship between microstructure, mechanical properties and dislocation substructures in a multiphase steel. Revista Brasileira de Aplicações de Vácuo. 2008;23(2):52-57, https://doi.org/10.17563/rbav.v23i2.136

41. Chabok A, Galinmoghaddam E, De Hosson JTM, et al. Micromechanical evaluation of DP1000-GI dual-phase high-strength steel resistance spot weld. Journal of materials science. 2019;54(2):1703-1715, https://doi.org/10.1007/s10853-018-2886-z

42. Ramazani A, Mukherjee K, Abdurakhmanov A, et al. Characterization of Microstructure and Mechanical Properties of Resistance Spot Welded DP600 Steel. Metals. 2015;5(3):1704-1716, https://doi.org/10.3390/met5031704

43. Chabok A, Van der Aa E, De Hosson JTM, et al. Mechanical behavior and failure mechanism of resistance spot welded DP1000 dual phase steel. Materials & Design. 2017;124:171-182, https://doi.org/10.1016/j.matdes.2017.03.070

44. He Y, Rao Q, Tan Y. Investigation on the morphology of martensite in carbon steels. Journal of Central South University of Technology. 1996;3(2):122-134, https://doi.org/10.1007/BF02652191

45. Çalik A. Effect of cooling rate on hardness and microstructure of AISI 1020, AISI 1040 and AISI 1060 Steels. International Journal of Physical Sciences. 2009;4(9):514-518.

46. Zhang H, Wei Z, Xie F, et al. Assessment of the Properties of AISI 410 Martensitic Stainless Steel by an Eddy Current Method. Materials. 2019;12(8):1290, https://doi.org/10.3390/ma12081290

47. Wei Y, Li Y, Zhu L, et al. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins. Nature communications. 2014;5(1):1-8. https://doi.org/10.1038/ncomms4580

48. Pavlina E, Van Tyne C. Correlation of yield strength and tensile strength with hardness for steels. Journal of materials engineering and performance. 2008;17(6):888-893.

https://doi.org/10.1007/s11665-008-9225-5

49. Zhang X, Yao F, Ren Z, et al. Effect of welding current on weld formation, microstructure, and mechanical properties in resistance spot welding of CR590T/340Y galvanized dual phase steel. Materials. 2018;11(11):2310. https://doi.org/10.3390/ma11112310

50. Chao YJ. Ultimate strength and failure mechanism of resistance spot weld subjected to tensile, shear, or combined tensile/shear loads. J Eng Mater Technol. 2003;125(2):125-132. https://doi.org/10.1115/1.1555648

51. Liu C, Zheng X, He H, et al. Effect of work hardening on mechanical behavior of resistance spot welding joint during tension shear test. Materials & Design. 2016;100:188-197.

https://doi.org/10.1016/j.matdes.2016.03.120

52. Pouranvari M. Effect of resistance spot welding parameters on the HAZ softening of DP980 ferrite-martensite dual phase steel welds. World Applied Sciences Journal. 2011;15(10):1454-1458.

53. Pouranvari M. Fracture toughness of martensitic stainless steel resistance spot welds. Materials Science and Engineering: A. 2017;680:97-107. https://doi.org/10.1016/j.msea.2016.10.088

54. Furusako S, Murayama G, Oikawa H, et al. Current problems and the answer techniques in welding technique of auto bodies (first part). Nippon Steel Technical Report. 2013;103:69-75.

55. Yates J, Zanganeh M, Tai Y. Quantifying crack tip displacement fields with DIC. Engineering Fracture Mechanics. 2010;77(11):2063-2076. http://dx.doi.org/10.1016/j.engfracmech.2010.03.025

Downloads

Published

2025-09-15

How to Cite

Ghadbeigi, H., Yu, F., Pinna, C., Smith, S., & Van der Aa, E. (2025). Failure analysis of resistance spot welds in a DP1000 automotive steel: full field macro/ micro scale deformation analysis. Journal of Design Against Fatigue, 3(2), 1-17. https://doi.org/10.62676/jdaf.2025.3.2.10