Comparison of energy absorption in conventional and auxetic shoes: gait analysis and finite element modeling
DOI:
https://doi.org/10.62676/jz62m929Keywords:
Auxetic, Finite Element (FE), FE modeling, Gait analysis, Strain energy, Shock absorptionAbstract
A three-dimensional finite element (FE) model of the heel and shoe sole was developed to analyze the effects of materials with different Poisson's ratios for midsole on energy absorption and impact shock in the heel area during walking. The heel model was obtained from CT-scan data. The FE model was verified using Anybody software for barefoot with data obtained from gait analysis. Sole layers and plantar soft tissue were modeled, and five different Poisson's ratios (-0.4, -0.2, 0, 0.2, and 0.4) were compared for the midsole layer. In order to obtain the contact force, experiments were performed on a force plate using shoes with either auxetic or conventional midsole layer. Rayleigh damping theory was used to simulate viscous damping behavior in the midsole layer. The results showed that for materials with the same Young's modulus, there was less compression, energy absorption, and viscous dissipation energy in the auxetic model in comparison to the conventional model. However, when compressive strains of sole layers were the same (i.e., by changing Young's modulus), more energy absorption (about 9%) was observed for the midsole with negative Poisson's ratio with respect to the conventional midsole layer.
References
1. R. S. Goonetilleke, Footwear cushioning: Relating objective and subjective measurements, Hum. Factors. 41(2) (1999) 241–256, https://doi:10.1518/001872099779591231
2. M. A. Lafortune, E. M. Hennig, Cushioning properties of footwear during walking: accelerometer and force platform measurements, Clin. Biomech. 7(3) (1992) 181–184, https://doi.org/10.1016/0268-0033(92)90034-2
3. M. Campbell, T. X. Us, Patent Application Publication (10) Pub (2015), No: US 2015 / 0176237 A1
4. G. N. Greaves, A. L. Greer, R. S. Lakes, T. Rouxel, Poisson’s ratio and modern materials, Nat. Mater. 10 (2011) 823–37, https://doi.org/10.1038/nmat3134
5. K. E. Evans, A. Alderson, Auxetic materials: functional materials and structures from lateral thinking. Adv. Mater. 12 (2000) 617. https://doi.org/10.1002/(SICI)1521-4095(200005)12:9%3C617::AID-ADMA617%3E3.0.CO;2-3
6. W. Jiang, X. Ren, S. L. Wang, X. G. Zhang, X. Y. Zhang, C. Luo, Y. M. Xie, F. Scarpa, A. Alderson, K. E. Evans, Manufacturing, characteristics and applications of auxetic foams: A state-of-the-art review, Composites Part B: Engineering. 235 (2022), https://doi.org/10.1016/j.compositesb.2022.109733.
7. R. Critchley, I. Corni, J. A. Wharton, F. C. Walsh, R. J. Wood, K. R. Stokes, The preparation of auxetic foams by three-dimensional printing and their characteristics, Adv Eng Mater. 15 (10) (2013) 980–5, https://doi.org/10.1002/adem.201300030
8. R. Lakes, Foam structures with a negative Poisson’s ratio, Science. 235 (1987) 1038–40, https://doi.org/10.1126/science.235.4792.1038
9. D. Fan, M. Li, J. Qiu, H. Xing, Z. Jiang, T. Tang, Novel method for preparing auxetic foam from closed-cell polymer foam based on the steam penetration and condensation process, ACS Appl Mater Interfaces. 10 (2018)22669–77, https://doi.org/10.1021/acsami.8b02332
10. F. Chiang, Manufacturing and characterization of an auxetic composite, Supplemental proceedings: materials processing and interfaces, TMS, editor, 2012.
11. N. Chan, K. E. Evans, Fabrication methods for auxetic foams, J Mater Sci. 32(1997) 5945–53, https://doi.org/10.1023/A:1018606926094
12. E. A. Friis, R. S. Lakes, J. B. Park, Negative Poisson’s ratio polymeric and metallic foams, J Mater Sci. 23(1988) 4406–14, https://doi.org/10.1007/BF00551939
13. N. H. Z. Abedini, A. Nourani, M. Mohseni, N. Hosseini, S. Norouzi, P. R. Bakhshayesh, Effects of geometrical and processing parameters on mechanical properties of auxetic polyurethane foams. SN Appl. Sci. 162 (2022), https://doi.org/10.1007/s42452-022-05042-8
14. R. S. Lakes, K. Elms, Indentability of Conventional and Negative Poisson’s Ratio Foams, J. Compos. Mater. 27(12) (1993) 1193–1202, https://doi.org/10.1177/002199839302701203
15. C. Moroney, A. Alderson, T. Allen, M. Sanami, P. Venkatraman, The Application of Auxetic Material for Protective Sports Apparel, Proceedings. 2(6) (2018) 251, https://doi.org/10.3390/proceedings2060251
16. T. Allen, O. Duncan, L. Foster, T. Senior, D. Zampieri, Edeh, V., and Alderson, A., Snow Sports Trauma and Safety, In Snow Sports Trauma and Safety, I. Scher, R. Greenwald, N. Petrone, Springer, Cham, 2017
17. M. Sanami, N. Ravirala, K. Alderson, A. Alderson, Auxetic materials for sports applications, Procedia Eng. 72 (2014) 453–458, https://doi.org/10.1016/j.proeng.2014.06.079
18. L. A. Stojmanovski Mercieca, C. Formosa, J. N. Grima, N. Chockalingam, R. Gatt, A. Gatt, On the Use of Auxetics in Footwear: Investigating the Effect of Padding and Padding Material on Forefoot Pressure in High Heels, Phys. Status Solidi Basic Res. 254(12) (2017) 1–5, https://doi.org/10.1002/pssb.201700528
19. E. P. Application, Designated extension states, Office, 1(19) (2007)1–18
20. A. Hinrichs, K. Malukhina, I. Sharma, M. Vierra, Active Auxetic Heel Support for Achilles Tendon Therapy, Bioeng. Sr. Theses. (2018), https://doi: 10.3390/ma15041439
21. M. R. Dehaghani, A. Nourani, N. Arjmand, Effects of auxetic shoe on lumbar spine kinematics and kinetics during gait and drop vertical jump by a combined in vivo and modeling investigation, Sci Rep. 12(1) (2022) 18326, https://doi.org/10.1038/s41598-022-21540-6
22. A. Cappozzo, Gait analysis methodology. Hum Mov Sci. 3 (1984) 27–50, https://doi.org/10.1016/0167-9457(84)90004-6
23. A. A. Hulleck, M. D. Menoth, N. Abdallah, M. El Rich, K. Khalaf, Present and future of gait assessment in clinical practice: Towards the application of novel trends and technologies, Front Med Technol. 16 (2022) 901331, https://doi.org/10.3389/fmedt.2022.901331. PMID: 36590154; PMCID: PMC9800936
24. P. R. Cavanagh, Plantar soft tissue thickness during ground contact in walking, J. Biomech. 32(6) (1999) 623–628, https://doi.org/10.1016/s0021-9290(99)00028-7
25. W. R. Ledoux, J. J. Blevins, The compressive material properties of the plantar soft tissue, J. Biomech. 40(13) (2007), 2975–2981, https://doi.org/10.1016/j.jbiomech.2007.02.009
26. N. Mills, Running shoe materials, In Materials in Sports Equipment, M. Jenkins., Woodhead, 2003.
27. Y.T. Jamshidi, S. Sadeghnejad, M. Sadighi, Viscoelastic Behavior Determination of EVA Elastomeric Foams using FEA, The 23rd Annual International Conference on Mechanical Engineering, ISME (2015), http://dx.doi.org/10.13140/2.1.2288.4166
28. G. W. Jenkins, C. P. Kemnitz, G. J. Tortora, Anatomy and physiology: from science to life, 2nd ed., John Wiley and Sons, 2006
29. I. Chowdhury, S. P. Dasgupta, Computation of Rayleigh damping coefficients for large systems, Electron. J. Geotech. Eng., 8(2003) 1–11, https://doi.org/10.1007/s42452-020-2629-z
30. A. I. Yusuf, N. M Amin, Determination of Rayleigh damping coefficient for natural damping rubber plate using finite element modal analysis, InCIEC (2014) 713–725, http://dx.doi.org/10.1007/978-981-287-290-6_62
31. S. Robbins, E. Waked, Balance and vertical impact in sports: Role of shoe sole materials, Arch. Phys. Med. Rehabil. 78(5) (1997) 463–467, https://doi.org/10.1016/s0003-9993(97)90157-x
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Journal of Design Against Fatigue

This work is licensed under a Creative Commons Attribution 4.0 International License.